Non-ionic emulsion of an oxidized Low Density polyethylene wax
APPLICATIONS:
HAUBERK PE 1036 provides lubricity & is effective as high temperature mold release for metal dies.
Recommended Levels 10-50% based on the total formulation
It is compatible with all known polymer dispersions, resin solutions, plasticizers, film building agents and surfactants. The wax emulsion gives a strong anti-slip effect and is characterized by a good dirt-repellent effect. The above-mentioned properties are generated by mixing HAUBERK PE 1036 with polymers in a ratio of 3:1 (solid wax to solid polymer). Mixing at a ratio of 1:6 increases the water and alcohol resistance, abrasion resistance (scuff resistance) and the protection against heel marking (foot traffic resistance)
Recommended Levels
5-10% based upon total formulation
PACKING:
200 kg HDPE drums
SHELF LIFE:
Temperature sensitive. To be stored and transported between 5 °C and 35 °C. Stir before use. It is stable for 6 months from the date of manufacture.
Copyright © 2021 Hauberk Chemicals Corporation - All Rights Reserved.
Powered by Hauberk Chemicals Corporation
This website uses cookies. By continuing to use this site, you accept our use of cookies.